| Base | Polychloroprene SBR |
| Hardness Shore A | 60/50 |
| Density | 1360 kg m³ |
| Tensile Strength | 3000KPA |
| Elongation @ Break | Continuous -10ºC to 70 ºC |
| Temperature Range | Intermittent -10ºC to 90ºC |
| Good resistance to ageing and most chemicals | |
| Bridge Bearing data sheet | MR 204 BS1151 2650 BS5400 PL 9 |
| Base Polymer | NR |
| Colour | Black |
| Hardness | 55° ± 5° Shore A |
| Specific Gravity | 1.13g/cm³ |
| Tensile Strength | 20 MPa (minimum) |
| Elongation | 500% |
| Compression Set (22hrs @ 70°C) | 25% (typical) |
| Heat Ageing (168 hrs @ 70°C): | |
| Change in Hardness | +5 Shore A (typical) |
| Change in Tensile | -5% (typical) |
| Change in Elongation | -10% (typical) |
| Temperature Range | -30°C – +70°C |
Bearing Strips
Our bearing strips are made from solid SH Neoprene rubber. Available in sheets, rolls or cut strips as required. Thickness ranges from 0.5mm - 25.0mm. Available to BS2752 specification. Solid rubbers also available in Nitrile, Silicone, Butyl and Viton. Thickness ranges from 1.0mm - 15.0mm
Contact Us
Bearing Strips - FEATURES
Textbox Section
A solid SH Neoprene rubber. Available in sheets, rolls or cut strips as required. Thickness ranges from 0.5mm - 25.0mm. Available to BS2752 specification.
Solid rubbers also available in Nitrile, Silicone, Butyl and Viton. Thickness ranges from 1.0mm - 15.0mm
Available in BS Z60 Bridge Bearing Grade
Bearing Strips - TECHNICAL DATA
Textbox Section